Program Benz AKL with Autel IM608 or VVDI MB or CG MB

Have Mercedes Benz with all keys lost (AKL), to program new key using Autel MaxiIM IM608 or VVDI MB or CG MB programmer? Let’s listen to experienced user’s sharing.

1. Autel MaxiIM IM608 program key for MB: longer time when getting password

Tip:

1). Good internet connection, if it takes too long time to get the password (for example 20 minutes to 1 hour), you probably have bad wifi connection, always use good wifi connection, not use cell phone.

Then cancel it and retry again, it might take 10-13 min.

One user feedback: mine always says 10-50 min (even though I had a w207 e350 last night take 64 min.

2). It’s quicker to use IM608 to work on MB on bench .

One user feedback: use bench job if you want obtain speed and fast password 5 min

3). Compared with VVDI MB and CGDI MB, Autel IM608 won’t need token to calculated the password.

4). Add key with autel IM608 is ok, add key will take about 5 minutes. AKL then it can take time….

2. VVDI MB program Benz key when all keys lost: done in 5mins

Xhorse VVDI MB takes 4 minutes to collect data, and 2 minutes to calculate.

Read users’ feedback:

1). VVDI MB for the win always and im608 only backup;

2) 100% success so far with Autel.

3) Got the VVDI MB out and MB AKL job done in 5 minutes, I get 1 free token each day so can add a key for free. 2 tokens needed for akl but I’m happy to pull the Ezs and solder to get password if needed.

For the tokens needed:

If you have Xhorse Condor Mini Plus or Xhorse Dolphin XP-005, you can have one free token each day.

The token is not expensive, here is the best source of Xhorse VVDI MB with 1-year unlimited token

3. CGDI MBprogram Benz key when all keys lost: confirmed and quick

Official claim: collection time 1’50s, password calculation time 40s, 99% get password for one time calculator, it is the fastest key programming tool to calculate the password at present.

Support MB models AKL including 211,209,204,207,212,166,246,197,172,164 +, 216

It needs token to calculate MB password:

One token is for 4 dollar

180-day token is for 60 dollars

User feedback:

1). I never have problem on Mercedes with Autel IM608, but still I have cgdi as a backup

2) CGDI MB is the best tool for MB.

Comments

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: * Drivability * Fuel Efficiency * Power Loss * Fault Codes * Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...

Autel scanner

Search This Blog