Autel scanner

  Autel MaxiIM Series IMMO Programming Tool new released Autel MaxiIM KM100 universal key generator kit. Compare with Autel MaxiIM  IM508 and IM608 , Autel KM100 support universal Transponder & Key Generation,Transponder Simulation Editing & Cloning and Ignition Coil Detection. Autel KM100 is not support vehicle diagnostic and service functions. Autel IM608 VS IM508 VS KM100 Comparison Table: Function Autel MaxiIM IM508 Autel MaxiIM IM608 Autel MaxiIM KM100 Universal Transponder & Key Generation No No Yes Transponder Simulation Editing & Cloning No No Yes Ignition Coil Detection No No Yes Vehicle Diagnostics Yes, Basic function Yes No Vehicle Service Functions Yes Yes No IMMO Function via Programmer Yes Yes No Frequency Reading Yes Yes Yes Frequency Detection Yes Yes Yes Key Unlocking/Key Renew Yes Yes Yes Immobilizer Data Processing Yes Yes Yes IMMO in Open OBD mode Yes Yes Yes...

Question: Anyone know where we find information about Airbag module resets. It appears  Autel IM508 or  IM608 with  XP400 has this functionality, but I need the process explained better. Answer : Autel does not clear just read eeprom. You need to transfer data online or by other tools/software to get a cleared crash file. Then write it back to eeprom. Here is a demo guide on how to use the im608 to basically copy the crash data off of an airbag module. This is from a 2018 Ford Focus. We are going to read the data from the crash unit from the SRS RCM unit and clear the data. Then we are going to put the clear data back onto the memory chip on this unit. This model use 95640 memory chip which is kind of pretty common for this model. Take airbag module off. Got four screws down. Once you remove those 4 screws the cover then comes off. It’s gonna look like this now on the underside of the board is the actually memory chip and got the clamp placed. Connect...

Autel MaxiIM IM508  and  IM608 released Toyota 2019-2021 proximity smart key programming without PIN nor NASTF. Here  Obd2tool.com introduces 2 ways to add a spare key to Corolla with 4A proximity. Way 1: Remove Smart Box Way 2: Don’t need to remove smart box Way 1: Remove Smart Key Model example: Toyota Corolla Altis 2021 Remove Smart Box from the vehicle and connect with Gbox following operation guide Select Toyota-Manual selection- Other- Corolla- 2009 onwards- Smart Key- ZRE (2019-) Select Control Unit- Kyeless Ssystem(CAN)- Backup IMMO Data Backing up EEPROM data that can be used to add more smart key without password Remove the smart box and then connect with G-Box follow operation guide Press Yes to continue Communicating with the smart box Backing up EEPROM File your name file and press Save Re-plug smart box back to the vehicle Select Add Smart Key Add more Key Max 4 keys Turn on ignition switch Turn ignition off and turn hazar...

This is a 2014 Audi A6 IMMO5 with BCM2 unencrypted. Autel IM508  XP400 will show you how to set up bench connection. Autel wants this done to get immo info. You need read bcm2 on bench, write key in dump to can turn the ignition on, then read ecu and tcu over abs CAN-L and CAN-H. Then I unlock key with KD and make dealer key again and adopt on car. The red cable i used is from MPPS, only +12, GND, CAN-L-H. You can use Blue cable from xp400. Read BCM2 data Read engine Read ELV Read TCU I failed to read ELV data, but never mind,  I have immo data from bcm2 already. Then unlock key with Keydiy KD-X2 under this option- Audi PCB2 4G0959754K 868M