Autel scanner

Autel MaxiIM IM508 IM608 IM608 Pro New Update in 2022 Year For Volvo: Global 1. Adds Add Smart Key, All Smart Keys Lost, Erase Smart Key and Read CEM Security Data functions for models below: XC40 EV (2021), XC60 PHEV (2018-2021), XC90 PHEV (2016-2021), S60 PHEV (2018-2021), and S90 PHEV (2019-2021). 2. Optimizes process for Key Learning and Read CEM Data functions as well as operation guide and schematic diagrams for some systems. For Tata: IMEA Adds Add Key and All Keys Lost functions for models below: Blade key: Tigor (BS6), Tiago (BS6), Altroz (BS6), Nexon (BS6), Harrier (BS4), Harrier (BS6), Safari (BS6) and Venture (BS4). Smart key: Altroz (BS6), Safari (BS6), Nexon (BS6), Harrier (BS4), Harrier (BS6), Tigor (BS6) and Punch (BS6). For Audi: 1. Adds Read Encrypted BCM2 IMMO Data function for Audi A4/A5/Q5 as of 2013 (version: 0711/0650/0641/0633). 2. Adds Read Encrypted BCM2 IMMO Data function for Audi A6/A7/A8 as of 2013 (version: 0827/0825/0824/0582/0572/0560/0551/0521/0510)

  Can Autel IM608 pro be used to program a new TPMS tire valve on an Opel Astra 2017? How it goes? TPMS is listed in the service menu but had no luck with it. Just wanted to ask if anyone had any luck with it. What I couldn’t understand is where it says hold the antenna of a low frequency tool or equivalent against the tire sidewall. Does that mean it needs another tool to go with it? Answer & suggestion: Autel MS906 also has TPMS in the service menu,  but for the registration of the sensors you need another tool – TS (MS906TS, TS401 , TS501 , TS601 , TS508 , TS608 MaxiTS series) with which you wake up the sensors, otherwise it doesn’t work. Astra needs a secondary device to activate the sensor, autel im608 will only put car to programing mode but you will need a seperate tool to activate the sensor.  I have done last week with other tools, not possibble without specific sensor activation tool You can write the sensors Id manually. But ...

Autel MaxiIM IM508 , IM608 ,  IM608 Pro immo tools have good feedback on the market . Engineer have made some details how to do MQB key programming instructions for VW V5.10 as bellowing , please check : 1.Go to Advanced Mode 1.MQB Add key and all key lost two menus as follows: Advanced Mode>MQB(Beta)>Key learning Advanced Mode>MQB(Beta)>All keys lost 2.IMMO IV 3.Add key and all key lost two menus as follows: Advanced Mode>IMMO 4 Instrument CAN>Key learning Advanced Mode>IMMO 4 Instrument CAN>All keys lost 4.IMMO IV+MQB 5.Add key and all key lost two menus as follows: Advanced Mode>IMMO 4 Instrument CAN>Key learning Advanced Mode>IMMO 4 Instrument CAN>All keys lost IMMO data computation request interface. Sever computation failed. Please contact the dealer! Error code:1001 Manually input pincode and cs code to do the key learning. 1.IMMO IV Make dealer key Expert Selection>IMMO IV Instrument CAN>VDO NEC 24C64 20...

Autel CAN FD Adapter can expand the support of the CAN FD protocol to specifically support the diagnosis of some new models. Such as 2020+ GM models, 2018- Ford models. The CAN FD Adapter must be used with a supported Autel VCI(vehicle communication interface) to communicate with applicable vehicles. Workable Autel Diagnostic Tools: Gen 1 Autel MaxiSys units: MX808/MP808, MS905, MS906, MS906BT, MS906TS, MS908, MS908P, MSELITE. Gen 2 Autel MaxiSys units: MaxiADAS, MS908S, MS908SP , IM508 , IM608 , IM608 Pro Note: Autel Gen 3 units: Ultra, MS919 or MS909 have already supported the protocol, no need for this adapter. Diagnose on a GM Chevrolet Onix E 2020 with DS808 : It failed to diagnose the vehicle via OBD without CAN FD Adapter for the first time. It prompts “Device unable to communicate with the control unit” on tablet. After connecting with the adapter, it succeed to diagnose fault codes.

Autel one year Update Service for  Autel MaxiSys Pro / MK908 /Elite/ MS908/MS906/MS906TS/MS906BT/DS808Kit/ MaxiIM IM608 / IM608 Pro ect If your any autel product is over warrantry for free update, you can buy this service to get update online. Available for All the Autel product which over 1 year online update. If your Autel device need update,please contact us( sales@obd2tool.com ): 1.Please tell us your device model,eg:MS908P 2.Please tell us your device S/N,eg:SN V09G60100000 After receive the update fee, we will provide a year software update online service. Why buy update service from us? we offer better price than others. Product Model             Our Update Price     Market Update Price           Maxisys Pro $798 $1,295 Maxisys MS908CV $849 $1,295 Maxisys MS908 $695 $895 Maxisys MS906TS $648 $795 ...

  Autel BLOCKBUSTER UPGRADE Password-Free Toyota 4A Smart Key Creation Newly Added! World Debut! 2021-Corolla HV . Corolla Touring/HV . Corolla Sport/HV . Corolla Cross/HV 4A Smart Key Model . Smart Key Add . Smart Key Delete . All Key Lost Immobilizer Data Backup – Analog Key Generation New Software Added! Supports Add/Erase and all key lost for4A Smart-Key equipped Corolla HV, Corolla Touring HV, Corolla Sport HV, and Corolla Cross HV Toyota models of 2019-2021. Use  Autel APB112 Smart Key Simulator and  G-BOX 2 to read data from the immobilizer, eliminating the need for a password to add a 4A Smart Key. For Toyota: Autel MaxiIM IM508 / IM608 / IM608 Pro Adds Add Smart Key, Erase Smart Key, PEPS Reset, Back up IMMO Data and Generate Analog Key functions for 4A smart key-equipped models of 2021 below: Corolla (fuel/HV), Corolla Touring (fuel/HV), Corolla Sport (fuel/HV), Corolla Cross (fuel/HV) and Levin (fuel/HV). [First released password-free functions...

Most customers buy Autel MaxiIM IM series machines for key programming , and autel factory have updated the IM508 / IM608 / IM608 Pro software recently , for update details , please check as bellowing : BMW 1. Supports New Software Version (swfl_00002419_085_010_080) for Key Learning function for FEM / BDC Immobilizer System. [Global Initial Launch] 2. Adds 196 Software Versions, Supporting Read ISN (OBD Mode) function for B48 / B58 Engine. [Global Initial Launch] Ford / Mazda 1. Adds Parameter Reset function for following models for USA: C-MAX with Blade Key (2013-2015), Focus with Smart Key (2015-2018), Escape with Smart Key (2017-2018), F-150 (2015-2020), F- 250 (2017-2019), F-350 (2017-2019) and F-Series Super Duty (2017-2019). 2. Adds Key Learning function without PIN for Bronco Sport with Smart Key (2021-) for USA. 3. Supports password-free IMMO functions for following models up to 2021: Edge and Transit Connect. 4. Adds Key Learning function without PIN for Follow...

Autel comparison:  Autel Maxisys Ultra vs MaxiIM IM608 . IM608 VS Maxisys Ultra on Hardware Autel IM608 Autel Ultra   Operating system Android 4.4.2, Kitkat Android 7.0 OS Processor Samsung Exynos hexa-core Processor(1.3GHz Quad-core ARM Cortex-A7 + 1.7GHz Dual-core ARM Cortex-A15) Samsung Exynos8895V octa-core Processor ( 2.3 GHz Quad-core Mongoose + 1.7GHz Quad-core A53) Processor Memory 2GB+ 64GB 4GB RAM & 256GB On-board Memory Display 10.1-inch LED capacitive touch screen with 1920×1200 resolution  Large 12.9’’ Touchscreen (2732 x 2048) Connectivity Wi-Fi (802.11 a/b/g/n/ac) USB: 2.0 BT v.2.1 + EDR SD Card (Support up to 32GB) HDMI WiFix2 (802.11 a/b/g/n/ac 2×2 MIMO)BT v.2.1 + EDR GPS USB 2.0 (Two USB HOST Type A, one USB mini device) HDMI 2.0 SD Card (Support up to 256GB)   Camera (rear) 8.0 Megapixel, AF with Flashlight Rear: 16 Megapixel, Autofocus with FlashlightFront: 5 Megapixel   Sensor...

  All keys lost BMW F21 2015.  Autel MaxiIM IM608 Read the ISN of G-box2 on the bench. Then 2 new keys are programmed into the FEM module. Success with Autel on this one. Also took out DME and read ISN on the bank. Via obd not possible with autel on this one. The readout took no longer than 2 minutes. Take a look at my work platform, which I connected: Autel MaxiIM IM608, MaxiFlash JVCI, XP400 Pro , Gbox2 as well as BMW FEM / BDC Test Platform. Good to know: you can have the whole set of Autel MaxiIM IM608 key programmer at uobdii.com, which includes Autel MaxiIM IM608, APB112 Smart Key Simulator and G-BOX2 Ship.

Here introduce the Autel IM608 Pro Key programmer . Hope this article can work for you . Recently So many friends asked what is different between  Autel MaxiIM IM608 and Autel MaxiIM IM608 PRO. In fact there is no big different between both.The main different is IM608 PRO with the XP400 Pro Key Programmer ,but if you you have the Autel MaxiIM IM608 ,You can just purchase XP400 Pro separately to do same function as IM608 PRO. Autel MaxiIM IM608 PRO Highlights: 1. Upgraded Version of Autel IM608 Key Programmer 2. One Year Free Update Online on Autel Official Website 3. Comes with XP400 Pro which adds more functionality for BMW, Mercedes-Benz, as well as EEPROM reading 4. Used with IMKPA Accessories Which adds BMW EWS3 key learning, Benz NEC key learning and Benz ESL_W209 read/write/erase 5. Existing Autel IM508/ IM608 Users Can Upgrade To IM608 Pro by Purchasing XP400 Pro Programmer Autel MaxiIM IM608 Functions: 1.Read & Clear Fault Codes | Short description & c...

Of course, The  Autel IM508 ,  IM608 ,  IM608 Pro are original .All of them are from Autel ,No one can clone Autel device .IM 508 is the startest version for key programming .The IM608 is the second ,and the IM608 Pro is the latest one . IM608 PRO as latest one update ,that include function of the  Autel Scanner IM508 ,IM608 ,even added more featurn they do not have .luckly ,if you have the IM508 and IM608 ,you just purchase the XP400 PRO ,then you can do same function with the IM 608 PRO. If you want to learn more XP400 PRO.You can search this link : https://www.obd2tool.com/goods-10394-Autel-XP400-PRO-Key-and-Chip-Programmer-Plus-Autel-IMKPA-Expanded-Key-Programming-Accessories-Kit.html What Features Can Autel XP400 Pro Bring for IM508/IM608? Autel XP400 Pro Key Programmer supports to work with Autel MaxiIM IM508, IM608 or IM608 Pro to bring more additional immo features than XP400. Especially for IM508, buy it together with XP400 Pro is quite a b...

  Problem: Used  Autel IM608 Pro to add key on a 2013 Mazda CX-5, it failed and now has the key light fault will not clear. And this is the fault code: Incorrect Component Installed… I used a genuine key. This is the original and the one I tried to program. I have this old key in the van. How to fix Autel im608 Pro “Incorrect Component Installed”? Both keys (previous and new) need to be the same type. If one is 3-button and the other 2-button. You mentioned you used a genuine key, could be possible that the other key is aftermarket? 2 identical genuine keys will work ok. 2 identical aftermarket keys will also work ok. But don’t mix-match them. Ske13e is 433mhz you would use for NZ new models. Ske13d is 315mhz and the correct one for Jap import. yes you can reuse a previously programmed one. if you delete all keys then do all keys lost with 2 matching. Both remotes are 2 button type. Update: Just fixed it the was both 2 button but part numbers on the key wa...

  IM608 IMMO Lexus(US) Car List Vehicle Model Year System Add Key All Keys Lost Remote Learning NX300H 2015-2021 Keyless System By OBD Partially support by OBD/ on-bench By OBD IM608 IMMO Lexus(EU) Car List Vehicle Model Year System Add Key All Keys Lost Remote Learning NX300H / Keyless System By OBD Partially support by OBD/ on-bench × How to add Lexus NX300H 2018 smart key? Here taking Autel IM608 to program 2018 Lexus(EU) NX300H as an example. Connect IM608 with OBD2 port, press IMMO >> Lexus >> Manual selection >> Europe >> NX300H >> Smart key >> Keyless system(CAN) >> Add smart key Do you want to use the Simulator Key APB112? No Note: each step must be completed within the specified time. The position for learning include:5 Put a learned smart key close to the START button. Put a smart key to be learned close to the START button. Learning succeeded. Test the new key, it can work...

  Autel IM608 Pro is not only an on-vehicle programmer but also an EEPROM programmer. One tablet supports multiple ways to replace car keys, which can efficiently support your repair works. This post will show you that how to use it to program EEPROM on a Porsche. EEPROM is hard to navigate. There are two scenarios for using EEPROM . *    One is if you want to add a new key using certain vehicles like BMW, AUDI and Porsche. *    Another is if you replace an ECU like the engine and need to read the old unit’s info. It’s easy to program a Porsche key using Autel IM608 Pro and D flash. That means we will read the data from a chip. Procedures: First, take out the chipset from the immobilizer system We need to read info from the chipset by connecting it with XP400 Pro key programmer. Make sure you’re connected to the key programmer and the programmer is connected to the IM608 Pro tablet. Next, go to learn key for Porsche. Select Progr...