Autel scanner

Does anyone know if this CAN FD adapter is compatible with the Autel IM608 Pro . Or the team doesn’t need it to work with the CAN FD line? Yes, the CAN-FD adapter is compatible with IM508 , IM608, IM608 Pro and the JVCI. the IM608 does not come with CAN-FD protocol which you need for CAN-FD work. It’s a magic tool that gets you into the new system for GM and Ford. The ultra already comes compatible with can fd, there is an adapter autels sells for the rest of tools. You can use the VCI Mini, 100, full size with all of them. No the only VCIs made with CAN FD, MEGA CAN, DoIP, etc are the new ones with the ms909, ms919, and Ultra. However, you can buy a CAN FD adapter and use with it. CAN FD Adapter is compatible with following Autel VCI • Compatible with VCI or VCI/J2534 device included with Gen 1 Autel MaxiSys units: MX808 , MS905, MS906 , MS906BT , MS906TS , MS908, MS908P , MSELITE • Compatible with VCI/J2534 device included with the Gen 2 Autel MaxiSys units: MaxiADAS, MS...

  Question: Can I program VVDI BE Key XNBZ01 with Autel IM608 Pro ? Look at VVDI BE Key image below: Read the success stories below: It can be programmed without problems with Autel IM608 , I did with this one on E240. But you can’t change frequency via IM608.  IM608 does not have the capability to change Mercedes key frequency like the vvdi mb. If you remove the capacitor where it says FRE it will change the frequency, the yellow label on the key wrapper tells you about the frequency. Look at this image showing desolder this resistor for 433 MHz: Or use vvdi mb to change Frequency 315 or 433 no need to desolder.

Today we have  Xtool X100 Pad3 SE with KC501 programmer, and then of course we have the AUTEL IM608 PRO with XP400 Pro, we have all hooked up, I want to explain to you guys at differences, similarities. Similarities: They are both for programmers, for diagnostics, there’s many options for both machines. 1. They both have smart key emulators for Toyota Lexus, so this is only when you’re doing all keys lost for Toyota and Lexus, they both have their emulators for smart keys. Okay, you can easily add a key. Xtool KS-01 emulator for PAD3 APB112 emulator  for IM608Pro 2. And we have diagnosis on both, we have immo programming, write key via dump, we have a lot of cool stuff. Differences: 1.  Autel IM608 Pro is more advanced than Xtool X100 PAD3 SE Next, let’s get into Xtool X100 PAD3 SE, gives you really easy really basic, really easy to program a key, really easy to run diagnostic. Okay, it’s really simple, very simple. Autel IM608 Pro is a little bit...