Autel IM608 2021 Ford Proximity All Keys Lost Won’t Disable Alarm Solution

A customer lost a 2021 Ford EcoSport Proximity Key and lost all keys. Tried Smart Pro first and it said it will but won’t communicate at all. Then Autel tried IM608, Autel won’t mute the alarm and won’t see an option for BCM. Wait the 10 minutes and hear 2 beeps from the horn, but then it says Security Access Denied. Hoping to see the option to remove BCM under the make and model, he didn’t find it.

Solution:
As we know, in pre-2015 Ford Prox All keys lost, you can turn the alarm off this way:
Wait to alarm off 10-15 minutes
Get the door code
Do the door code
car will double beep, then try.
That’s how to turn alarm off in olders.
But this is the new style.
You have to disconnect battery and when reconnect the scan tool disables the alarm before it can go off.
When that doesn’t work you have to pull the bcm module and solder and read the flash so you can make a key.
Here’s how we did when the alarm couldn’t be deactivated.
You use the Gbox connected to DLC and IM608/IM508. It keeps power to VCI while battery is disconnected.
To silence alarm pull the horn fuse in the bcm.

You have to disable to alarm unless you remove the bcm and solder onto the board and get the flash file to make the keys.
here’s a pic of the last bcm we soldered onto to read.

xhorse does have the adapter for the new ford’s for akl with alarm.
You won’t find the option under immo, you have to go into Programmer and then it has the options for BCM.

the best solution right now is xhorse vvdi key tool plus or OBDSTAR X300 DP Plus. They have an adapter cable for 15+ ford’s akl active alarm, you just plug it into the bcm without removing it, it reads the flash file it needs and then you make the key.

If you want to know more about Ford key programmer, please click Ford Trouble Repair.

Comments

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: * Drivability * Fuel Efficiency * Power Loss * Fault Codes * Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...

Autel scanner

Search This Blog