Hyundai Santa FE 2010 AKL Programming by Autel IM608 Success

This is a successful demonstration on how to add two new keys for Hyundai Santa FE 2010 by Autel IM608 when all keys lost.

Let’s start it from the key decoding.

Tools:
LISHI Decoder
Autel MaxiIM IM608
Xhorse Dolphin XP-005 key cutting machine
MINI Key Tool
XSKF01EN smart key

Step 1. Make key blades
Get door key bitting by LISHI Decoder.
Use Xhorse Dolphin XP-005 key cutting machine to make two blades.

The keys can only open the car’s door.

Step 2. Generate transponder
So now we’re going to generate remote by VVDI MINI Key Tool.

Press
Vehicle Remote>>Hyundai>>Santa Fe>>Elantra KeylessGo ID46 433
Insert the Xhorse XSKF01EN smart key into the coil and press “Generate”.

Step 3. Read PIN code
Now into the car.
Open the Autel IM608.

Press
IMMO>>Hyundai>>Manual selection>>Europe>>SANTAFE (CM)>>2010-2013>>Smart Key
Confirm the vehicle information and enter the main menu.
If anything puzzles, here select “Vehicle immo information” to check the key information and OBD position.

Then press “Immo status scan”, because we need to clear the DTCs first.
After scanning, select the fault one and select “Clear DTC” to clear the DTC as the prompts.

On scanning interface, press
Read PIN>>Read Pin code(46 Smart card)>>Read Pincode by OBD
Here it will say that the function only supports vehicles with 46-chip smart card.
Follow the prompts.

Then we have the password.

Step 4. All key lost programming
Back to scanning interface, press “All keys lost(guided)”.
For step 1, it will erase all existing keys.
Insert the smart key to be programmed into the card slot

For step 2, enter the password we just read.
For step 3, we can repeat the step to add keys.

Install the proximity key into XSKF01EN key.

Now we can start the car with the new key.

Complete!Nice work!
As you can see, very professional works and user-friendly guided procedure.

If you want to know more about Key Programmer , please visit our website: https://www.obd2tool.com

Comments

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: * Drivability * Fuel Efficiency * Power Loss * Fault Codes * Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...

Autel scanner

Search This Blog