OBDSTAR X300 DP Plus Program 2018 Ford Kuga backup Proximity key successfully

OBDSTAR Key Tool Master / X300 DP PLUS test report: 2018 Ford Kuga backup Proximity key successfully.
Look at the image:

OBDSTAR Key Tool Master is as the same as X300 DP Plus (E-commerce exclusive).

Good to know:

Add new key: no need to connect to P002 adapter and Ford all keys lost cable.

If program key for Ford /Lincoln / Mustang AKL (the following list): need extra P002 adapter and OBDStar All Key Lost Cable for Ford /Lincoln / Mustang.

Image 2: All Key Lost Cable for Ford /Lincoln / Mustang

Image 3: P002 adapter

ESCAPE 2020 , ESCORT 2018-
EXPEDITION 2020 , EVEREST 2017-
EXPLORER 2017- , F-150 2017-
F-250 2017- , FOCUS 2018-
MUSTANG 2017- , TAURUS 2017-
MONDEO 2017- , FUSION 2017-
RANGER 2017- , AVIATOR 2020
CONTINENTAI 2016- , CORSAIR 2020
MKC2015- , MKT 2020
MKX2015- , MKZ2015-
NAUTILUS 2018- , NAVIGATOR 2018-

OBDSTAR X300 DP Plus Ford AKL programming guide:

1. Ford Lincoln Mustang all keys lost programming connecting methods

1). Diag cable OBD connector(male)
2). Connect P002 connector(female)
3). Connect vehicle OBD diag connector(male)
4). Red clip(battery terminal)
5). Orange clip(positive cable)
6). P002 adapter

2. Operation guide
IMMO⇒Americas⇒FORD LINCOLN MERCURY⇒V34.45⇒FORD⇒EUROPE⇒EDGE⇒PROXIMITY⇒
2016.4-

All Keys Lost.

Make sure the internet connection is normal, then have P002 adapter and AKL for Ford cable correctly connected to the vehicle.

Switch ignition off.

Have Key count and VIN.

Insert the key into the card slot, the position is as follows.

Is the alarm active?

Next steps are to follow the on-screen guide until key programming successfully.

Good to know:

There is a operation guide manual on how to use OBDSTAR X300 DP Plus to program Ford AKL

And there is also built-in tips in the obdstar X300 DP Plus (Look at the following image, click on “Tips” for instruction).

Comments

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: * Drivability * Fuel Efficiency * Power Loss * Fault Codes * Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...

Autel scanner

Search This Blog