Skip to main content

How to Read Benz W207 EIS Data by Autel IM508 with XP400 Pro

Autel MaxiIM IM508 with XP400 Pro supports the same advanced functions as Autel IM608 and IM608 Pro incl. Mercedes infrared key read/write, remote frequency detection, Benz 3rd generation IMMO add key, all keys lost via OBD, 2015-2019 Jaguar Land Rover write key via dump and Volvo Smart key/Fobik smart key learning. This post will share the guide to use to read Benz EIS W207 data via OBD.

All devices required:
Autel MaxiIM IM508 with XP400 Pro Key and Chip Programmer
Mercedes- Benz EIS/ELV
Instrument
Gateway
Note: All Benz control modules above have been disassembled from the car.

How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-1

Connection:
Connect MaxiIM IM508 to the dashboard via OBDII main cable
Connect XP400 Pro with IM508 via the programmer USB cable (Its color is black)
Note: Don’t connect XP400 Pro programmer to the vehicle OBD connector via OBDII cable.

How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-2

Operation:
Enter “IMMO” function of the IM508 tablet-> Select “Mercedes Benz”
Make sure the xp400 pro has been connected to IM508 properly
Select “Automatic selection”-> tap “Read” to read out VIN automatically (No need to enter VIN manually)

How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-3

Read out the vehicle info and confirm if it is correct

How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-4

Select “2008-2014”-> “Control unit”-> “EIS tools”-> “Read EIS data”-> “OBD”-> “On vehicle”-> “Auto scan”

How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-5
How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-6
How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-7
How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-8

Identify the EIS type is W207

How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-9

Read out the EIS info and the car key No.1 and No.2 position have been used

How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-10

Save the EIS data, then you can upload the data to the server to calculate the password and program key.

How-to-Read-Benz-W207-EIS-Data-by-Autel-IM508-with-XP400-Pro-11

Done!

Labels:

Comments

Post a Comment

Popular posts from this blog

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...
2 comments
Read more

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...
Post a Comment
Read more

Autel MaxiSys Pro Vehicle Coverage

Autel Maxisys Pro Vehicle Coverage: AUDI, BENZ, BMW, DACIA, EU FORD, LANDROVER, MINI, OPEL, PEUGEOT, RENAULT, SEAT, SKODA, VW, VOLVO, SMART, JAGUAR, BENZ SPRINTER, SAAB, FIAT, ABARTH, LACIA, ALFA ROMEO, VAUXHALL, MAYBACH, BENTLEY, BUGATTI, PORSCHE,GM, CHRYSLER, FORD,SUZUKI, KIA, DAWEOO, ISUZU, TOYOTA, SUBARU, SCION, NISSAN, MITSUBISHI, LEXUS, INFINITI, HYUNDAI, HONDA, ACCURA, MAZDA. Autel MaxiSys Pro MS908P Hardware: 1.Extraordinarily powerful Cortex-A9 quad-core processor 2.9.7” 1,024x768 LED-backlit glossy Multi Touch capacitive display with IPS technology 3.Internal reliable and fast 32GB Solid State Drive for better performance 4.Built-in 5-megapixel rear camera with autofocus and flashlight 5.Dual-band (2.4 GHz & 5.0 GHz) 802.11n Wi-Fi to access your favorite web resources 6.Unique shop tough ergonomic design features strong rubber protection and housing; 7.Built-in rechargeable lithium-ion battery for up to 8 hours of continuous operation 8.USB, audi...
Post a Comment
Read more