Skip to main content

How to use Autel IM508 and XP400 Pro to do FRM Repair

 

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-1

Confirmed: Autel IM508 and XP400 Pro can do FRM Repair. Here we go for step-by-step procedure.

Tap “Programmer”.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-1
It says “Programmer is disconnected! Please connect the programmer first and click [OK].”, tap “Ok”.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-2

Tap “Chip (EEPROM, MCU, ECU)”.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-3

Tap “Chip read & write”.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-4

Tap “Other”.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-5

Tap “BMW”.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-6

Tap “E-series ->RFM ->XEQ384 ->RW”.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-7

Read the operation guide below.

1.  Only for “Read” and “Write” supported at unencrypted status.
2.  If the EEE or D-FLASH reads the data again after it has been written, and the data are inconsistent, please first execute “Write partition”, and then carry out normal read and write after the operation of “Write partition” is successful.
3.  “Write partition” supports for setting partition, but will lead to EEE or D-FLASH data loss.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-88

Tap “D-FLASH” and “OK”.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-9
Tap “Schematic diagram”.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-10

There are diagram and operation guide to follow.

How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-11
How-to-use-Autel-IM508-and-XP400-Pro-to-do-FRM-Repair-12

Next is to follow the guide to do.

If you want to know more about Autel Scanner,  please contact us freely.

Labels:

Comments

Post a Comment

Popular posts from this blog

How to Delete Software of AUTEL MaxiSYS Pro MS908P

WIFI AUTEL MaxiSYS Pro MS908P is with complete capabilities for codes, live data, actuation tests, adaptations, coding and ECU programming.And sometimes,some of car software in the device can not use correctly,you may need to delete the software and download the car software again to Autel Maxisys Pro. New  Autel Maxisys Pro MS908P Diagnostic System with WiFi Free Shipping How to Delete Software of AUTEL MaxiSYS Pro MS908P? 1.Start the machine,and click Data Manager. 2.Click Apps. 3.Then it will display the car software in the device. 4.Choose the car software you need to delete. 5.Click the delete button to remove.
Post a Comment
Read more

Autel MaxiCom MK906 vs. MaxiSYS MS906 vs. MaxiSYS Pro MS908P

Right here comes the new diagnostic pad Autel produced – autel scanner MaxiCom MK906. so, how much do you understand it? Is it worth you dollars? Look here. What’s Autel MaxiCom MK906: Q: Is this a fake Chinese copy of the Autel MaxiSYS MS906 ? A: No, that is AUTEL original product. Right here will be the link on AUTEL official web page: http://www.obd2tool.com/goods-5089-AUTEL+MaxiSYS+MS906+Auto+Diagnostic+Scanner+Next+Generation+of+Autel+MaxiDAS+DS708+Diagnostic+Tools.html Q: How much would be the up dates right after the free year to get updates? Is it 500 like the ms906. A: Yes, exact same with MS906, one particular year free of charge update, then 495USD/year. Q: Does it support coding and programming? A: MK906 functions for coding but no luck with programming. For programming with  autel scanner ms908p is definitely the only option. Autel MK906 vs Autel MS906 vs autel ms908p : Functions comparison: Autel MS906 is employed for auto diagnostic test only, wh...
Post a Comment
Read more

Autel MaxiDas DS808 Software and Firmware Update Manual

  Firmware Upgrade for Autel MaxiDas DS808 This option allows you to update the firmware of the scan tool. Connect the scan tablet with the vehicle through DLC or use the mini USB cable for power supply. Follow the on-screen instructions to complete the operation. Internet connection is necessary for this operation. How to Set “Auto Update” for Autel DS808? The Auto Update allows the tool to automatically update the OS, the MaxiDAS system, and the Vehicle. All you need to do is to switch ON by tapping the button on the right side of each and set the desired automatic update time. To set auto system or vehicle update 1. Tap the Settings application on the MaxiDAS Job Menu. 2. Tap the Auto Update option on the left column. The three auto update items list on the right. 3. Switch the ON the button on the right of item that you want to auto update. 4. Tap on the time to set time, you can use the + and – button or tap on the numbers then the manual input screen will pop...
Post a Comment
Read more