How to Fix Autel MaxiSys Subscription Expired But Actually Not Expired

Problem: Turned on my Autel MaxiSys Pro MS908P today and purchased one-year subscription service and did some update, but it still said my subscription is expired, actually it doesn’t expire until October 10th, 2022, how to solve the problem?

OBD2TOOL chief engineer replied:

Please click on “Cancel” to see if it can download and update, if not please upload log via MaxiTool and Autel tech will reach you.

What about other users’ experiences:

Generally speaking, do a full factory reset on your tool before your subscription expires to refresh your Maxisys line tools (Maxisys MS906, MS906BT, MS908P, Elite, MS909 etc). Also use a 32 GB SD card to expand internal storage. Part of the problem is your tool has run out of memory.

1. How to do Factory Reset?

If not expired, you should connect your Autel MaxiSys Pro device to any laptop using the black usb cable and after the laptop detect the usb driver, turn off usb and unplug the cable, reset your device and try again.

2. Use a 32 GB SD card to expand internal storage

Firstly, to create a backup, simply insert the Micro SD card into your tool and open the base screen (not the diagnostic application). Then open ES File Explorer. There you will find two instances of SD Cards. Open the internal drive, usually label “SD_CARD” or similar. Hold your finger on “SCAN” to bring up lower menu. Select copy. Now open the external SD card, label “EXT_SD” or similar.

Paste the copy of “SCAN” here. Depending on model of scan tool this can take up to 3 hours. Once this is done, remove the SD card and store it somewhere safe where it will not be damaged. It is very small so store it somewhere you’re not going to forget it.

Now take the second 32 GB card, insert it into your Autel/Auro tool and repeat the above process. Leave this one in your tool after backup. Update this once a month until your subscription expires, swap with the other backup, repeat.

Now you don’t have to stress it when something crashes.

The Autel line of tools will only recognize up to 32 GB Micro SD Cards. We highly recommend buying this pair of 2x 32 GB Micro SD cards to create redundant backups in case of file corruption.

Alright, if Autel MaxiSys Pro software subscription is actually expired, here is 1 Year Software Subscription Total Care Program:

https://www.obd2tool.com/goods-6970-autel-update-software-one-year-Update-Service.html

Comments

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: * Drivability * Fuel Efficiency * Power Loss * Fault Codes * Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...

Autel scanner

Search This Blog