How to Add 2019 GMC Sierra Key Fob with Autel AP200

It is simple to use Autel MaxiAP AP200 Bluetooth OBD2 Scanner to perform 2019 GMC Sierra remote programming.

Here we go for the step-by-step procedure:

1. Install “Autel MaxiAP200” APP on your mobile phone (Both IOS and Android are okay). Here is a 1 minute video on how to install the APP:
2. Open “Autel MaxiAP200” APP.
3. Select “Service”.
4. Select “Immo keys”.
5. Select “GM” and it pops up “Please connect the VCI”.

6. Select “Manual selection”, then “Model Year (s)” 2019, then “Vehicle type” Passenger car, then make “GMC”, then series “Sierra”.

7. Select “Hot Function”, then “Body control module”, then “Add /replace key fobs”, then “Erase / program all key fobs”.

The procedure of “Erase / program all key fobs” is only applicable to vehicles without RPO ATH. Vehicles with ATH need to be programmed by means of Service Programming System (SPS).

This procedure will clear all key fob (s) from the module memory. Prior to starting this procedure, please ensure that all key fobs to be programmed are present.

1) Set in Learn mode by selecting Learn.
2) Select the key fob to be added. Press and hold the Lock and Unlock buttons at the same time, when the fob(s) is added successfully, the parameter will show learnt.
3). Repeat step 2 until each required fob is learnt.
4) Exit the procedure after complete.

Notice: each fob may take 5-8s to program.

Job is done!

Comments

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: * Drivability * Fuel Efficiency * Power Loss * Fault Codes * Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...

Autel scanner

Search This Blog