Autel IM608 Program 2021 Nissan Altima All Key Lost

Have a 2021 Nissan Altima with only one working key, and need to add a new key with Autel IM608.

Let’s see how to do that.

Connect the MaxiIM IM608 to the vehicle correctly

1. Connect the MaxiFlash to the vehicle’s DLC for both communication and power source
2. Connect the MaxiFlash to the Autel IM608 via BT pairing

Turn on IM608 tablet, select IMMO>> Accept the disclaimer>> Enter the terms in the search box to search for quickly

Then select Nissan >> Manual selection

We have the ignition on, so we’re going to also turn on the hazard lights

Then select North America>> ALTIMA>> 2020-

Confirm the vehicle info

Select Control unit>> Immobilizer/Smart System>> Immobilizer remote control learning>> All smart key lost

Pay attention to notice “Perform this function will detect all smart keys, it can program up to 4 smart keys! Whether or not to continue?”

Press “Yes” to continue

Close all the doors and click the start button

Read the vehicle’s BCM code successfully. It’s not 284B14BA0B and 284B14BY1A, so there is no risk in performing the immobilizer function. Just go ahead to do.

Turn off the ignition and turn on the emergency flasher

The hazard lights are already on

Open and close the door once

Press start button once, keep the logo side of a new smart key cling to car start button, then the dashboard is illuminated and the indicator light flashes 5 times.

Note: If the indicator light doesn’t go out, please use a working key to press the start button.

Take the new key firstly. Push the start button one time, the lights appears on the dashboard. Then push it one more time to turn it off.

Next take the original key to do the same thing, the lights flash, wait for 5 seconds, the lights go out. Hit the start button again.

Take the first key programmed to hit the start button again, we hear all beep, push the start button one more time, and registration is completed.

Finally, test the remote and start the car, and both work perfectly.

Awesome! Autel MaxiIM IM608 add a new smart key to 2021 Nissan Altima successfully.

It’s very easy to use. Just follow the on-screen instructions to operate step by step, and you can program the key perfectly.

http://cheapobd2tool.com/2021/05/24/autel-im608-program-2021-nissan-altima-all-key-lost/

Comments

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: * Drivability * Fuel Efficiency * Power Loss * Fault Codes * Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...

Autel scanner

Search This Blog