Autel IM508 Program 2020 Nissan Altima SL AKL by OBD Success

Autel MaxiIM IM508 can program 2020 Nissan Altima SL AKL(all keys lost)by OBD Success. IMMO supported add key, all keys lost, read password & remote learning. Detailed vehicle list as below:

Autel IM508 IMMO Nissan(NA) Altima Car List

Year	System	Add key	All keys lost	Read password	Remote learning	IMMO part replacement
2019	Immobilizer/smart system	By OBD	By OBD	By OBD	By OBD	BCM(partially support), ECM(partially support)
2020-	Immobilizer/smart system	By OBD	By OBD	By OBD	By OBD	BCM(partially support), ECM(partially support)

Full vehicle coverage please check: https://www.autel.com/vehicle-coverage/coverage2

How to program 2020 Nissan Altima SL all keys lost?

Connect Autel IM508 Key Programmer with OBD, press

IMMO >> VIN >> Auto detect

Turn on the hazard warning light.

Please illuminate the instrument cluster before the operation(if the ignition can be turned on)!

Please open and close the driver door once.

Wait for scanning vehicle system until 100%…

Immo/ smart system >> Smart key >> Immobilizer remote control learning >> When performing key registration

Perform this function will delete all the smart keys, it can program up to 4 smart keys!

Press “Yes” to continue.

Close all the doors and click the start button.

Note down BCM code, press “Yes” to continue.

Turn off the ignition and turn on the emergency flasher.

Please open and close the door once.

Press start button once, keep the logo side of a new smart key cling to car start button, then the dashboard is illuminated and the indicator light flashes 5 times.

Note: if the indicator light doesn’t go out, please use a working key to press the start button.

Switch ignition off.

Program success.

Press “Yes” to program next one, “No” to complete.

Press the start button, within 5s to put the key mark of the first programmed smart key close to start button, the buzzer rings continuously, turn off ignition.

Programming complete.

Check if the remote control is operating properly. Start the engine and wait for 5s.

Test the 2 keys, all are workable.

Done!

This is how to use Autel Scanner IM508 to program 2 keys for 2020 Nissan Altima SL when all keys lost. It is really easy to do. If you’re a locksmith, simply buy IM508 plus XP400 Pro separately will be a good investment.

http://forobd2tool.com/blog/2021/05/28/autel-im508-program-2020-nissan-altima-sl-akl-by-obd-success/

Comments

How to Delete Software of AUTEL MaxiSYS Pro MS908P

WIFI AUTEL MaxiSYS Pro MS908P is with complete capabilities for codes, live data, actuation tests, adaptations, coding and ECU programming.And sometimes,some of car software in the device can not use correctly,you may need to delete the software and download the car software again to Autel Maxisys Pro. New Autel Maxisys Pro MS908P Diagnostic System with WiFi Free Shipping How to Delete Software of AUTEL MaxiSYS Pro MS908P? 1.Start the machine,and click Data Manager. 2.Click Apps. 3.Then it will display the car software in the device. 4.Choose the car software you need to delete. 5.Click the delete button to remove.

How to Activate Autel AP200 OBD2 Scanner with Full Brands

Activation of all brands for Autel AP200 Bluetooth OBD2 scanner is possible, but without special functions (adaptation, coding), only diagnostics for all modules and reset of service intervals. But it is a good alternative for personal use for DIYers. When activated for all brands, the program also performs only diagnostics for all makes. Such an adapter is suitable for personal use and auto-fitting. For car services, it will be a tool for quickly reading errors from all makes. Activation of all Autel AP200 brands in Xdiag ap200 indefinitely You can activate in 2 ways: 1) Through the Autel Start program 2) Through the Xdiag AP200 program, which has shown itself to be on the good side in working with Launch adapters. Here are some images showing Autel ap 200 activations for all brands: Upon activation of Autel ap200 for all brands, you can search Google (i.e famous 4pda.to website). It has instructions to install cracked app and install database for all...

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

Autel scanner

Search This Blog