(Report) AUTEL DS808 diagnose Honda Ridgeline

AUTEL MaxiDAS DS808 report for your checking:
Use MaxiDAS DS808 Kit to diagnose Honda Ridgeline, fully scan truck systems, read and clear all DTC codes quickly and OK!
How to do ? Check below steps.

AUTEL DS808 diagnose Honda Ridgeline 2006 steps:
Step 1: use the main cable to connect AUTEL DS808 with truck via the OBD2 port.
And you can see both the power indicator (left) and vehicle communication indicator (right) on.

Step 2: long press the LOCK/POWER button to turn on AUTEL DS808.
The main menu show as below, you click “Diagnostics” icon to start.

According to Honda brand, click the “Asia” tab to choose “Honda”.

Step 3: Click “Auto Detect” and DS808 will automatically show you this Honda Ridgeline VIN.

Click “OK” and you can also view vehicle info, click “Yes” to go on.
Model year: 2006
Model: RIDGELINE
VIN as above

Step 4: Choose vehicle region, in this case, it’s USA.

Choose “Diagnosis” and “Auto Scan” function.

Now AUTEL DS808 starts to scan full systems for Honda Ridgeline!

And you just need to wait the process complete 100%.
When it complete, DS808 will show you: which systems get wrong and how many faults it found.
Step 5: In this case, there are DTC codes exist in TPMS and Body Electrical modules:
Body Electrical DTC code: B1177
TPMS DTC codes: 11-1, 13-1, 17-1, 32-1, 37-1

Click the fault to read and clear DTC codes easily!

Now NO DTC exists in TPMS and Body Electrical modules anymore!
Know more details and info about this AUTEL DS808 tablet scanner from www.obd2tool.com?

http://obd2trade.com/2017/11/27/how-to-do-nissan-xterra-active-test-with-autel-ds708-diagnostic-scanner/

Comments

How to Activate Autel AP200 OBD2 Scanner with Full Brands

Activation of all brands for Autel AP200 Bluetooth OBD2 scanner is possible, but without special functions (adaptation, coding), only diagnostics for all modules and reset of service intervals. But it is a good alternative for personal use for DIYers. When activated for all brands, the program also performs only diagnostics for all makes. Such an adapter is suitable for personal use and auto-fitting. For car services, it will be a tool for quickly reading errors from all makes. Activation of all Autel AP200 brands in Xdiag ap200 indefinitely You can activate in 2 ways: 1) Through the Autel Start program 2) Through the Xdiag AP200 program, which has shown itself to be on the good side in working with Launch adapters. Here are some images showing Autel ap 200 activations for all brands: Upon activation of Autel ap200 for all brands, you can search Google (i.e famous 4pda.to website). It has instructions to install cracked app and install database for all...

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

How to Register & Update Autel MK808/ MK808TS/ MK808BT?

This is a guide to show the registration & upgrade procedure for Autel MaxiCOM MK808 , MK808TS & MK808BT. It is also applied to most Original Autel Diagnostic Tool Tablets. Note: please ensure the WiFi connection is good before processing. How to register Autel MK808, MK808TS, MK808BT? 1. Open MaxiCom APP, click “Update”to login interface. 2. Register >> Create an Autel ID Input your email address, password & verification code to sign up. Your new account is successfully created. 3. Click “Register”, then log in. The Autel scan tool will register with serial number automatically. Click “OK” to next step. How to update Autel MK808, MK808TS, MK808BT? 1. Click arrow buttons to update system apps firstly: OS, System Program, AutoVIN; 2. Select appropriate car software to update. Note: Highly recommend you back up the diagnostic data in the Scan folder of the root directory of your memory. You can restore them in case of data loss...

Autel scanner

Search This Blog