Skip to main content

Guide use Autel MaxiDAS DS808 diagnose Mercedes-Benz successfully

2-2
This post is about How to Autel MaxiDAS DS808 diagnose Mercedes-Benz successfully
Let’s unpack and unbox the Autel MaxiDAS DS808 and see together what it will do out of box no registration, no update, no nothing.
2-3
So let’s go ahead to plug the OBDII cable to the DS808 for the first time
2-3
Press the power button at the top, and you can slide the lock button.
2-4 2-5
Both of my previous scanners one goes for 150 dollar and another one reaches 400 dollars are not able to access to the computer of airbags, so let’s see out of box without any updates and registration of this Autel Scan Tool MaxiDas DS808 scanner can do for you.
As you can see, a red warning SRS light and watch the information sent, and it’s the reason why I need to get back DS808 scanner and find out what is happening to the vehicle.
2-6
Here you are, the MaxiDAS DS808 scanner is connected to the OBDII port of vehicle and the ignition is on.
2-7
So let’s see what we can do, let’s go to diagnostic.
2-8
Definitely go for “Automatic selection”
2-9
I don’t want to tap the VIN, so I will read it automatically.
2-10
And here you are, it is really pretty fast, this is absolutely awesome.
The new generation scan tool is super fast.
2-11
I know this Benz is 2004, so I will click “From 09/2003 to 12/2007.
2-12
Please select the steering left or right, all right , I click “Left”
2-13
Confirm vehicle profile, let’s say yes.
2-14
Yes “Diagnosis”, so you can see fast it goes.
2-15
I’ll go for “Auto scan”
2-16
Try to read fault code
No fault codes detected.
2-17
But I’m just confusing where is the airbag problem.
This is next screen we can see, the ME-SFI 2.8 Motor electronics 2.8 has no faults, but I want to go for airbag computer
2-18
So let’s exit to “Diagnostic menu” and select “Control Unit”, and click on “Body” then “AB-airbag” all right. No communication between the tester and control unit.
2-19 2-20
So, the reason is No register and No update MaxiDAS DS808 for Mercedes Benz from OBD2TOOL , only after register that it will start working. Registering the device was easy, you simply go to autel’s website and set up an account. Once you do that you take the registration code/ passcode from the scan tool and register it on the website. You then make sure that the scan tool is hooked up to your wifi which is setup in settings. Then you are ready to update the scan tool with the latest software.
That’s all
Thanks and enjoy your time.

http://cheapobd2.com/2017/11/27/guide-use-autel-maxidas-ds808-diagnose-mercedes-benz-successfully/
Labels:

Comments

Post a Comment

Popular posts from this blog

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...
2 comments
Read more

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...
Post a Comment
Read more

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: *   Drivability *   Fuel Efficiency *   Power Loss *   Fault Codes *  Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The  Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...
Post a Comment
Read more