Skip to main content

Autel MaxiSys Pro MS908P program Acura TSX 09 key

Keeps Autel MaxiSys Pro MS908P for some days, usually I use it for diagnosis like reading or clearing some faults. Today, I try it to program a new key for Acura TSX 2009. Work like a charm! I have to say that. MS908P with MaxiFlash Pro J2534 box to program keys like a professional key programmer, e.g. SKP900.
Here, I would share my experience of key programming for Acura TSX 2009.
items needed:
The original Acura key
8-2
A spare key to be programmed
8-3
MaxiSys pro MS908P
Autel MaxiFlash Pro J2534 ECU programming tool
My procedure to program a new Acura key
The car starts
Connect MS908 PRO and Autel MaxiFlash Pro J2534 ECU Programming Device with the car
8-4
MaxiSys pro MS908P starts
8-5
Insert the spare key and original key separately to be ON
8-2
8-7
When insert the original key, select Acura on MS908P
8-8
Then USA
8-9
Then Start New Session
8-10 8-11
8-12
Select Diagnosis
8-13
Then Control Unit
8-15
Then IMMOBI (immobilizer)
8-16
Keep the ignition ON until the tester directs you to turn it OFF
8-17
Program keys with a T5 stamped on the blade of the key…
8-18
Diagnostic system initializing…
Select IMMOBILIZER SETUP
8-19
Establishing vehicle communications…
Select ADD AND DELETE KEYS
8-21
Establishing vehicle communications…
Then ADD KEY
8-21
Establishing vehicle communications…
Turn the ignition switch OFF
8-22
Turn the ignition switch ON with an original key
8-23
Turn the ignition switch OFF within 17 seconds
8-24
Turn the ignition switch ON with an new key within 20 seconds
8-25
Turn the ignition switch OFF within 17 seconds
Turn the ignition switch ON within 20 seconds without changing the key
8-26
Turn the ignition switch OFF
Turn the ignition switch ON
Is the immobilizer indicator light turned OFF?
8-27
Then check the immobilizer indicator light
8-28
8-29
Turn the ignition switch ON
The registration of keys has been completed.
Turn the ignition switch OFF
http://forobd2tool.com/cheapobd2tool/wp-content/uploads/sites/3/2017/11/8-30.jpg
Then insert the key newly programmed to have a try and make sure that it works
8-31
Successfully programmed a Acura key with Autel MS908P and J2534 ECU programmer

http://cheapobd2tool.com/2017/11/28/autel-maxisys-pro-ms908p-program-acura-tsx-09-key-2/
Labels:

Comments

Post a Comment

Popular posts from this blog

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...
2 comments
Read more

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...
Post a Comment
Read more

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: *   Drivability *   Fuel Efficiency *   Power Loss *   Fault Codes *  Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The  Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...
Post a Comment
Read more