Skip to main content

MaxiSys Elite General Introduction

The Autel Maxisys Elite Diagnostic Platform is the next generation of smart solution for specialized automotive diagnosis. Featuring the NVIDIA’s Tegra ? 4-PLUS-1 quad-core 1.90GHz processor, a 9.7‖ Retina display with a super sensitive capacitive screen, combined with an optimized array of powerful applications, and the best possible coverage of OE-level diagnostics, the MaxiSys Elite performs every job from comprehensive vehicle diagnostics and analysis, to advanced ECU programming quickly and efficiently.
There are 3 main components to the MaxiSys Elite system:
1.  Autel Scanner MaxiSys Display Tablet – the central processor and monitor for the system
2.  Vehicle Communication Interface (VCI) – the J2534 ECU Programming Device for accessing vehicle data with programming capabilities
3.  Docking Station – provides optimum visibility and convenient charging This manual describes the construction and operation of the devices and how they work together to deliver diagnostic solutions.
MaxiSys Display Tablet
1.Functional Description
30-1
1.  9.7‖ Retina display with capacitive touch screen
2.  Built-in Microphone
3.  LED Indicator Light – indicates battery level & charging or system status General Introduction  MaxiSys Display Tablet
4.  Front Camera
5.  Ambient Light Sensor – detects ambient brightness The LED Indicator Light displays differently in response to the 4 status below:
A.  Charged – indicated by steady green light
B.  Charging – indicated by steady yellow light
C.  Low Battery – indicated by steady red light
D.  Standby – indicated by flashing blue light
30-2
6.  USB Port – for Ethernet adapter and/or VCI connection
7.  HDMI Port
8.  Mini USB OTG Port
9.  Head Phone Jack
10. DC Power Supply Input Port
11. Lock/Power Button – turns the device on & off with long press, or locks the screen with short press
30-3
12. Collapsible Stand – extends from the back to allow hands-free viewing of the display tablet at a 30-degree angle
13. Removable Battery General Introduction  MaxiSys Display Tablet
14. Mini SD Slot – optional module
15. Camera Lens
16. Camera Flash/Torch
Power Sources
The Maxisys Elite can receive power from any of the following sources:
1. Rechargeable Battery Pack
2. AC/DC Power Supply – using power adapter or docking station
3. Vehicle Power
Rechargeable Battery Pack
The display tablet can be powered with the rechargeable battery, which if fully charged can provide sufficient power for about 4 hours of continuous operation.
AC/DC Power Supply
The display tablet can be powered from a wall socket using the AC/DC power adapter or the docking station. The AC/DC power supply also charges the battery pack.
Vehicle Power
The display tablet can be powered from the www.obd2tool.com lighter or other suitable power port on the test vehicle through a direct cable connection. The vehicle power cable connects to the DC power supply port on the top side of the display unit.
Labels:

Comments

Post a Comment

Popular posts from this blog

How to Activate Autel AP200 OBD2 Scanner with Full Brands

  Activation of all brands for  Autel AP200 Bluetooth OBD2 scanner is possible, but without special functions (adaptation, coding), only diagnostics for all modules and reset of service intervals. But it is a good alternative for personal use for DIYers. When activated for all brands, the program also performs only diagnostics for all makes. Such an adapter is suitable for personal use and auto-fitting. For car services, it will be a tool for quickly reading errors from all makes. Activation of all Autel AP200 brands in Xdiag ap200 indefinitely You can activate in 2 ways: 1) Through the Autel Start program 2) Through the Xdiag AP200 program, which has shown itself to be on the good side in working with Launch adapters. Here are some images showing  Autel ap 200 activations for all brands: Upon activation of Autel ap200 for all brands, you can search Google (i.e famous 4pda.to website). It has instructions to install cracked app and install database for all...
Post a Comment
Read more

How to Register & Update Autel MK808/ MK808TS/ MK808BT?

This is a guide to show the registration & upgrade procedure for Autel MaxiCOM MK808 , MK808TS & MK808BT. It is also applied to most Original Autel Diagnostic Tool Tablets. Note: please ensure the WiFi connection is good before processing. How to register Autel MK808, MK808TS, MK808BT? 1. Open MaxiCom APP, click “Update”to login interface. 2. Register >> Create an Autel ID Input your email address, password & verification code to sign up. Your new account is successfully created. 3.  Click “Register”, then log in. The Autel scan tool will register with serial number automatically. Click “OK” to next step. How to update Autel MK808, MK808TS, MK808BT? 1.  Click arrow buttons to update system apps firstly: OS, System Program, AutoVIN; 2.  Select appropriate car software to update. Note: Highly recommend you back up the diagnostic data in the Scan folder of the root directory of your memory. You can restore them in case of data loss...
Post a Comment
Read more

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: *   Drivability *   Fuel Efficiency *   Power Loss *   Fault Codes *  Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The  Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...
Post a Comment
Read more