Autel MaxiSYS Tablet Report Cloud Sharing via Text, E-Mail and QR Code

Autel MaxiSYS Tools adds another new update- Report Cloud Sharing. It can provide you additional ways to share a report via Text, E-Mail and QR Code. It applies to AUTEL Ultra series, MS906, MS906 Pro and MS906 Pro-TS.

There are two new ways to generate and save diagnostic reports.
Method 1: Done right after you scan a vehicle
Method 2: Using a previous scan that you can access in data manager

After a scan, click the save icon and save report on the top

Then save report by filling in license plate, current mileage, client name, phone number and file name.
Report saved successfully
Once the report PDF is successfully created, you can view the report.

To access a previous scan, tap Data Manager>> Vehicle history
And you’ll see all scans

Choose your scan
Then press the three dots on the upper right side and select ‘Get report’

Complete the relevant info for your customer and save it

We have added a new icon to access the reports.
Click Data Manager>> Report
Then you will see the saved reports that you can share a link.
On the upper left, you’ll see a small cloud icon.
If it is empty, that means it has not been saved yet for sharing
If there is a green checkmark in the cloud icon, that means it has been saved and is ready for you to share a link.

Select the red icon on the lower left
Choose ‘Report cloud sharing’

Then you see there are three ways to view and share report.

* Scan the QR code to share
You can scan with another device

* Send Email
Enter the customer’s email address and click ‘OK’
Then it will send to your customer or your team member a link that they can use to download the report.

* Send SMS (Text)
Enter the customer’s phone number and click ‘OK’
The system will generate a link to this report and send it to them via text message.

Either way, this link gives your recipient 24 7 access to the report regardless of shop hours or if your diagnostic tool is even powered on.

This new ability is being rolled out across our family or Maxisys’s products and will make sharing faster and easier inside your shop and beyond as always be sure to frequently update your Maxisys tools and be on the lookout for future time saving updates as they become available.

Comments

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

OBDSTAR X300 DP PLUS vs. Autel IM608 vs. Xtool Auto Pro Pad

What do you prefer as automotive key programmers 1 – OBDSTAR X300 DP PLUS 2 - Autel MaxiIM IM608 3 - Xtool Auto pro pad or other tablet? Here’s the true working experience & feedback from a Facebook locksmith group questionnaire. Keep updating. 1) OBDSTAR is very good. works very well really is very good for the price. I have both obdstar and xtool pad2. ObdStar is superior. It works very well on fiat renault bmw and other brands that are not easy to work with another tool. 2) I got the xtool pro pad it works well on cars like newer GMs and Hyundai and Chrysler most fords. Obdstar x300 strictly for Honda Toyota keys and Nissan. And lastly the old t300 for older Fords with the 4c keys. I’m thinking of getting the us version of lonstor. 3) AutoProPad, hands down. Its software is designed specifically for the US market. 4) I’m loving my IM608, the tool not only program the keys, but is an excellent scanner and can program a other units like ELV, dashboard, EZS...

Autel Maxisys Elite Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues: * Drivability * Fuel Efficiency * Power Loss * Fault Codes * Durability of Mechanical Parts The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The Autel OBD2 Scanner programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding o...

Autel scanner

Search This Blog