Autel XP400 Pro PC Software Installation Download & PC Communication Error Solution

The XP400 Pro is a replacement for XP400. It adds more functionality for BMW, Mercedes-Benz, as well as EEPROM reading. With the new protocols, the end-user will be able to read over 2000 (chips, components, devices) types including EEPROM and MCU Read, additional Odometer Read/Write, and more. Also, added functions for EWS3, W209, NEC, and more.

Download Free: Autel XP400 PRO PC Software V2.61 Setup

http://download1.auteltech.net/Download/PCSuite/PCProgrammer/V2.61/Setup.exe

How to install Autel XP400 / XP400PRO Adapter PC programmer
https://www.obd2tool.com/blog/2020/12/15/how-to-install-autel-xp400-pc-programmer-for-quick-start/

Software Update
The XP400 Pro software can be updated via the key programming tablet and a windows-based computer. This section describes two ways to update the software of the XP400 Pro.
Update via Autel’s Tablet
This function allows you to update the XP400 Pro software via Autel’s IMMO & Key Programming tablet.
1. Connect the XP400 Pro to Autel’s IMMO & Key Programming tablet via the supplied USB cable.
2. Verify the power LED light on the front panel is lit solid green.
3. Tap the “Programmer” application on the tablet’s main screen.
4. The tablet will automatically detect the software version information and download the software update if available.
Update via a Windows PC
This function allows you to update the XP400 Pro software via a Windows PC. The computer must be connected to the Internet to update the software on the XP400 Pro.
1. Connect the XP400 Pro to a PC with the supplied USB cable.
2. Verify the power LED on the front panel is lit solid green.
3. Open the PC software. If a firmware update is available for the XP400 Pro, a message will display to prompt you to update the software. Otherwise, no message displays.
4. After the update is complete, click the “About” button in the lower left corner of the PC software to view the current XP400 Pro firmware, hardware and PC software versions.

Product Troubleshooting
Here discusses errors that might occur when using the XP400 Pro and the steps to take to resolve these issues.
Vehicle Linking Error
A communication error occurs if the diagnostic tablet fails to communicate with the XP400 Pro. Please do the following to correct the error:

*   Verify that the XP400 Pro has been authorized by the diagnostic tablet.
*   Verify the Internet connection is strong and stable.
*   Verify that the power LED on the XP400 Pro is lit solid green.

PC Communication Error
A communication error occurs if the XP400 Pro fails to communicate with PC. Please do the following to correct the error:
*   Verify that the power LED on the XP400 Pro is lit solid green.
*   Ensure no firewall software on the PC is preventing communicationand that the USB port is functioning properly.
*   Ensure the USB communication status LED is blinking green.Contact technical support if the above steps fail to resolve the communication error.

How to Delete Software of AUTEL MaxiSYS Pro MS908P

WIFI AUTEL MaxiSYS Pro MS908P is with complete capabilities for codes, live data, actuation tests, adaptations, coding and ECU programming.And sometimes,some of car software in the device can not use correctly,you may need to delete the software and download the car software again to Autel Maxisys Pro. New Autel Maxisys Pro MS908P Diagnostic System with WiFi Free Shipping How to Delete Software of AUTEL MaxiSYS Pro MS908P? 1.Start the machine,and click Data Manager. 2.Click Apps. 3.Then it will display the car software in the device. 4.Choose the car software you need to delete. 5.Click the delete button to remove.

How to Activate Autel AP200 OBD2 Scanner with Full Brands

Activation of all brands for Autel AP200 Bluetooth OBD2 scanner is possible, but without special functions (adaptation, coding), only diagnostics for all modules and reset of service intervals. But it is a good alternative for personal use for DIYers. When activated for all brands, the program also performs only diagnostics for all makes. Such an adapter is suitable for personal use and auto-fitting. For car services, it will be a tool for quickly reading errors from all makes. Activation of all Autel AP200 brands in Xdiag ap200 indefinitely You can activate in 2 ways: 1) Through the Autel Start program 2) Through the Xdiag AP200 program, which has shown itself to be on the good side in working with Launch adapters. Here are some images showing Autel ap 200 activations for all brands: Upon activation of Autel ap200 for all brands, you can search Google (i.e famous 4pda.to website). It has instructions to install cracked app and install database for all...

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked? In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low. What’s the Symptoms? The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class -You hear air compressor engaging when parked. -Air compressor releases air when parked. -Car lowers overnight, not always. -Mercedes lowers drops on rear or front. -Mercedes raises itself when parked Cause When the car is parked the airmatic will try to level the car. It does this by dischargin...

Autel scanner

Search This Blog