Autel scanner

  Autel IM SERIES Newest Update – Autel MaxiIM IM608 , MaxiIM IM508 , MaxiIM IM608 Pro For GM / Holden / Hummer 1. Adds Key Learning function for 130 models of Buick, Chevrolet and Cadillac for Asia, South America, Middle East, Africa, USA and India, including Spark (2013-2014) with smart key, Cavalier (2000-2005) with blade key, Chevrolet Utility (2015-) with blade key, Trax (2021) with smart key and Tahoe (2020) with smart key. 2. Adds Key Learning function for Holden models below: Astra (1995-2003), Barina (1995-1997), Calibra (1995-1996), Caprice (1993-2005), Cascada (2013-2019), Combo (1996-2001), Commodore (1997-2005), Maloo R8 (2002-2004), Monaro (2001-2006), Rodeo (1998-2008), Statesman (1993-2005) and Vectra (1997-2002). For Ford / Mazda 1. Adds Parameter Reset function for following models for USA: C-MAX with Blade Key (2013-2015), Focus with Smart Key (2015-2018), Escape with Smart Key (2017-2018), F-150 (2015-2020), F- 250 (2017-2019), F-350 (2017-2019)...

  This is a 2008 Mercedes GL450. We need to swap TCU transmission control unit and program it another donor one to the vehicle using  Autel MaxiIM IM608 on the bench. Let’s go ahead and do it. Select Immobilizer- Manual selection- GL/GLS- 2006 to 2008 From here we’re going to go to Control unit- TCU tools Go to check the wiring diagram first VGS/VGS2/VGS3 NAG2 wiring diagram this is the connections that we have to make between the transmission control unit and the obd cable that’s coming off the jbox on the im608 or the regular obd cable As you see we have one power and one ground since we don’t have power and ground coming from anywhere so i just decided to use this power pack or booster pack i use the power and ground with it another leak coming to here We’ve done the wiring press Exit we’re gonna go to read TCU data, Read the data save it. Then we’re going to go to renew TCU. It’s going to get a erase password off the internet. Only password is ...

  Question: Can I program VVDI BE Key XNBZ01 with Autel IM608 Pro ? Look at VVDI BE Key image below: Read the success stories below: It can be programmed without problems with Autel IM608 , I did with this one on E240. But you can’t change frequency via IM608.  IM608 does not have the capability to change Mercedes key frequency like the vvdi mb. If you remove the capacitor where it says FRE it will change the frequency, the yellow label on the key wrapper tells you about the frequency. Look at this image showing desolder this resistor for 433 MHz: Or use vvdi mb to change Frequency 315 or 433 no need to desolder.

  BMW 218d 2016 BDC module add key on bench with Autel MaxiIM IM608 successfully On November 19, 2021 By Eva I connected Autel MaxiIM IM608 , MaxiFlash JVCI J2534 ECU Reprogrammer , XP400 Pro , BDC module, BDC test platform and a good power supply. Love this BDC Test Platform, it also did a FEM module 2013.

  MaxiSYS MS906 Pro-TS is a high-powered eight-inch advanced diagnostic tablet featuring expanded software and cloud-based data and repair services. The MS906 Pro’s Octa-core processor, Android 7 operating system, and 128 GB of memory enable the tablet to perform advanced diagnostics, including coding and adaptations, access comprehensive repair information, and conduct battery and electrical system analysis* and ADAS calibrations.** MS906 Pro-TS integrate TPMS antenna module for performing comprehensive TPMS service. Description Hardware: • 8-inch, 1920 x 1200 high-resolution touchscreen tablet, Samsung Exynos Octa-core processor with 128 GB storage and running Android 7 operating system. • Long-lasting 11,600 mAh rechargeable battery, 5 MP front camera and 16 MP rear camera. • MaxiCVI V200 wireless Bluetooth vehicle communication interface supporting the latest communication protocols. Software:     • Comprehensive diagnosti...

  The MaxiSYS MS906S is an 8-inch touchscreen Android-based advanced diagnostic tablet powered by a hexa-core processor. It features 64GB memory and the Bluetooth-enabled VCI Mini with extension for easier OBDII port attachment. The MS906S features advanced diagnostics including active tests and bi-directional controls. Features include Scan VIN optical VIN/barcode recognition for quick vehicle identification, FCA Secure Gateway Access with AutoAuth subscription, Pre/Post-SCAN customizable reports, and forthcoming Cloud Data management and Repair & Diagnostic Database. The MS906S is packaged in a blow-molded case, includes free technical support, and one-year free software updates with one-year limited warranty. Description • 8-inch Wireless Touchscreen Diagnostics Tablet • Compatible with U.S., Asian and European Vehicles, 1996 and newer • Advanced Diagnostics, Bi-Directional Control and Active Tests • Bluetooth VCI Mini with extension for easier OBDII port c...

MaxiSYS MS906 Pro is a high-powered eight-inch advanced diagnostic tablet featuring expanded software and cloud-based data and repair services. The MS906 Pro’s Octa-core processor, Android 7 operating system, and 128 GB of memory enable the tablet to perform advanced diagnostics, including coding and adaptations, access comprehensive repair information, and conduct battery and electrical system analysis* and ADAS calibrations**. Description Hardware:  • 8-inch, 1920 x 1200 high-resolution touchscreen tablet, Samsung Exynos Octa-core processor with 128 GB storage and running Android 7 operating system. • Long-lasting 11,600 mAh rechargeable battery, 5 MP front camera and 16 MP rear camera. • MaxiCVI V200 wireless Bluetooth vehicle communication interface supporting the latest communication protocols. Software:         • Comprehensive diagnostics on 1996 and newer U.S., Asian and European vehicles • AutoScan: Scan all available sys...